Download here: SimHub Dashboards

Redadeg said:
Only 3 and a bit old, but you can try...
Click to expand...

Tried and tested in AMS2 and work perfect, I did do a personal edit previously but these AMS2 additions are superb.

Its a shame to rely on 3rd parties update to chase the official update but nature of the beast until devs finaly get it together for full telemetry.
 
bonjour,
je possède une base fanatec CDL DD et volant gt3 Mc Laren v2 les boutons attribué sur mon volant fonctionnait très bien pour le TC et le brake bias dans Lmu
maintenant seul le bouton répartition de frein fonctionne mais plus le Tc, j ai tout réinstallé fanalab, simhub etc.. mais rien ne change merci de vos réponse
 
Frantz said:
Good morning,
I have a fanatec CDL DD base and a Mc Laren v2 gt3 steering wheel. The buttons assigned to my steering wheel worked very well for TC and brake bias in Lmu.
now only the brake distribution button works but not the Tc, I reinstalled everything fanalab, simhub etc.. but nothing changes thank you for your response
Click to expand...
It's not updating on the Simhub dashboard due to the game telemetry only updating the value while in garage. It should update in the game itself. Can you confirm it does or does not update in the game itself. FYI, I have the same and it works for me.
 
thanks a lot Temur!

I just gave it a try and while ABS and TC is being updated now on the dashboard it updates the engine mapping too, so if I set ABS to e.g. 5 the engine mapping is set to 5 too on the dashboard
 
Last edited:
MJFox said:
thanks a lot Temur!

I just gave it a try and while ABS and TC is being updated now on the dashboard it updates the engine mapping too, so if I set ABS to e.g. 5 the engine mapping is set to 5 too on the dashboard
Click to expand...
Hello,
Yes thanks you so much @Redadeg for the update :)
I have the same behaviour with ABS, TC and VM_BRAKE_BALANCE, when the value update, it also updated the map_motor field with the last string get in simlab properties viewer.
In the Output log, i see, each time a param update the mpMotorMap is checked as change:

Code: 
12:21:55.475 TID:0xcaf4  DirectMemoryReader::Read(259) : RegenLevel   at addr: 0x00007FF65D9B4B30
12:21:55.676 TID:0xcaf4  DirectMemoryReader::Read(224) : mpMotorMap   at addr: 0x00007FF65D9B4B78
...
12:22:58.883 TID:0xcaf4  DirectMemoryReader::Read(259) : RegenLevel 50.2:49.8  at addr: 0x00007FF65D9B4B30
12:22:59.084 TID:0xcaf4  DirectMemoryReader::Read(224) : mpMotorMap 50.2:49.8  at addr: 0x00007FF65D9B4B78
12:22:59.084 TID:0xcaf4  DirectMemoryReader::Read(234) : mChangedParamTypeCurrent 1570458400  at addr: 0x00007FF65D9B4B20 slot 0

I notice than when Plugin is loaded in LMU, and the Redadeg plugin is running in simhub -> the PitStop MFD settings in LMU quick flash at a determined frequency. Values are quickly replaced, i think y the plugin, and restaured by the game.
If i stop simhub or just the Readadeg plugin in simhub (whithout closing simhub) -> quick update stop.
It's like a "memoryShared update" king of overlenght memory writing.

Perhaps it can help...
Thanks again for all.
Vincent
 
Last edited:
LordF said:
View attachment 2567

So, remove the Dashboard (just to be sure sure (or just re-import the dash)) and make sure you have the checkbox checked when importing the dashboard again. Alternatively go into your Windows / Control Panel / Fonts and import from there.
Click to expand...

could anybody please help me with the fonts? I imported the GT3 dashboards but Simhub doesn't ask me to install the dashboard fonts (there's no checkbox on the import popup)

how do I install the necessary fonts for e.g. the McLaren Dashboard?
 
Download the fonts from page #1, right-click on them and select 'install'. Or double-click the font-file and select [Install].

The check-box you mentioned is coming from Simhub asking if you want to overwrite an existing dashboard
 
LordF said:
Download the fonts from page #1, right-click on them and select 'install'. Or double-click the font-file and select [Install].

The check-box you mentioned is coming from Simhub asking if you want to overwrite an existing dashboard
Click to expand...

but there are no McLaren fonts on page #1 and the McLaren dashboard doesn't seem to have the fonts included (that's why Simhub doesn't ask to install them)
 
MJFox said:
but there are no McLaren fonts on page #1 and the McLaren dashboard doesn't seem to have the fonts included (that's why Simhub doesn't ask to install them)
Click to expand...
Missed the McLaren part. You have these fonts already installed in Windows. Just the Ferrari, Peugeot and Porsche needed additional fonts.
 
LordF said:
Missed the McLaren part. You have these fonts already installed in Windows. Just the Ferrari, Peugeot and Porsche needed additional fonts.
Click to expand...

I see, thanks! for some reason I needed to restart simhub for the right fonts to show
 
You must log in or register to reply here.
Back
Top